Introduction; Specifications, Appliance Dimensions & Installation Codes - Inca Metal Cutting Tasman DV Linear ESSENCE Installation And Operating Instructions Manual

1.0 INTRODUCTION

1.1 SPECIFICATIONS
TABLE 1
MANIFOLD PRESSURE: Hi
COLLECTEUR DE PRESSION: FORT
MANIFOLD PRESSURE: Lo
COLLECTEUR DE PRESSION: FAIBLE
GAS INLET SUPPLY PRESSURE:
ENTREE DE PRESSION
ORIFICE SIZE: @ 0-4500
FORMAT D'ORIFICE:
VALVE ORIFICE @ 0-4500
SOUPANGE D ORIFICE:
AIR SHUTTER
VOLET DE L AIR
CONTROL VALVE TYPE:
TYPE DE SOUPAPE
ÉVACUATION
VENTILATEUR
THIS APPLIANCE IS ONLY FOR USE WITH THE TYPE OF GAS INDICATED ON THE RATING
PLATE. THIS APPLIANCE IS NOT CONVERTIBLE FOR USE WITH ANY OTHER GASES.
CET APPAREIL DOIT ETRE UTILISE UNIQUEMENT AVEC LE TYPE DE GAZ INDIQUE SUR LA
PLAQUE SIGNALETIQUE. CET APPAREIL NE PEUT ETRE CONVERTI A D AUTRES GAZ.
ITEM
INPUT: Hi
INPUT: Lo
VENTING
FAN
NATURAL GAS (NG)
26,000 Btu/hr (7.62 kW)
10,500 Btu/hr (3.07 kW)
3.5 w.c. (0.87 kPa)
1.7 w.c. (0.42 kPa)
Minimum: 5.0 w.c. (1.2 kPa)
Maximum: 13.5 w.c. (3.4 kPa)
# 39 DMS
# 50 DMS
OPEN 1/8 min
(3.175mm)
Skytech AF-40004
2-ply aluminum vent
Simpson Duravent or Security Venting
Variable Speed (120 Volt)
Page 6 of 54