Mitsubishi WD-65000 Owner's Manual page 33

Setup Menu: Memorize channels and Assign Input
Figure 1. Memorizing Channels
Memorize menu
Memorize Channels : 023
Not in Memory
Now memorizing
all the stations
you can receive
on ANT-A Air
Please stand by.
CANCEL to cancel memorizing
Figure 2. Memorize Menu
Figure 3. Assign Input Menu
Figure 4. Language
Memorize Channels
(Figure 1 and 2)
This selection memorizes the channels your
TV can receive and skips the unused or
weak channels. You can stop memorization
at any time by pressing CANCEL. Channels
memorized prior to pressing CANCEL will
stay in memory. After channels are memo-
rized, you may select memorized channels in
ascending or descending order by pressing
the CHANNEL button on the remote control.
PIP
Assign Input Menu
(Figure 3)
Assign Input turns off unused inputs, turns
them on again, or changes the name of the
input. If you turn an input Off, it will be
skipped when you press the INPUT button on
the remote control. Your choices are:
Ant-A, and Ant-B: On or Off.
DTV: YPrPb, RGB, or Off.
Input: Cycle through a list of inputs
(Inputs 1 - 5, Component Inputs 1 - 2, PC-
1, and PC - 2).
Status: Turn the selected input On or Off.
Name: Name the selected input.
Language
(Figure 4)
Display the on-screen menus in either Eng-
lish or Spanish (Español). The first time your
TV was powered on, you were requested to
select an on-screen menu language. You may
change your selection by pressing the { or
} button on the remote control.
DTV Note: If you have a DTV receiver
connected, you will need to use that receiv-
er's channel memorization system to
memorize digital channels.
Part III : Setup
33