Mitsubishi WD-65000 Owner's Manual page 29

Digital light projection television
Table of Contents

Advertisement

Programming the Remote Control:
Activation of the System 4 Home Theater IR Control
Testing System 4 for Proper Setup
Move the slide switch to the position you
1
wish to test.
Point the remote at the TV.
2
Press and release the HOME THEATER
3
button. If the audio portion has been prop-
erly setup, your A/V receiver will have
changed to the appropriate input as indi-
cated in table 1, page 15. If the video
connection of your System 4 has been
properly setup, your TV will have changed
to the appropriate input.
AUDIO
If the A/V Receiver did not change
inputs...
Repeat Special Setups, page 15, and
1
retest.
Reposition IR emitter(s), page 22, and
2
retest.
Repeat To Activate the Audio Portion ,
3
page 28, and retest.
If your A/V receiver is still not responding
to the commands from your remote con-
trol, you may have an incompatible A/V
receiver. Proceed to Deactivating the
System 4 Home Theater IR Control, on
this page.
System 4 is designed for use with A/V
receivers that have at least 4 inputs. A/V
receivers with fewer may be only par-
tially compatible.
If the A/V Receiver changed to an input
other than the one indicated in table 1,
page 15.
Connect the audio output from your A/V
1
device to the A/V receiver input that your
A/V receiver DID change to, and retest.
If the TV did not change inputs...
Repeat To Activate the Video Portion ,
1
page 28, and retest.
Deactivating the System 4 Home Theater
IR Control
Simultaneously press the CANCEL button
1
and the HOME THEATER button.
When only the Audio Portion of System 4
is activated, the TV will automatically
select Input 1 when DBS, VCR, DVD or
AUDIO is selected and the HOME
THEATER button is pressed.
This is useful when the video for these
products are passed through the A/V
Receiver.
When only the Video Portion is
activated, the A/V Receiver will
automatically select the TV audio input
when the HOME THEATER button is
pressed. This is useful when audio
cables for DBS, VCR and DVD are
connected directly to the TV.
Part III : Setup
29

Advertisement

Table of Contents
loading

Table of Contents