Toyota 2010 Prius Owner's Manual page 233

Turning on the high beam headlights
■
Daytime running light system (if equipped)
To make your vehicle more visible to other drivers, the headlights turn on
automatically (at a reduced intensity) whenever the hybrid system is started
and the parking brake is released. Daytime running lights are not designed
for use at night.
■
Headlight control sensor (if equipped)
www.mycar.pk
2-3. Operating the lights and windshield wipers
ITO23P104a
The sensor may not function properly if
an object is placed on the sensor, or any-
thing that blocks the sensor is affixed to
the windshield.
Doing so interferes with the sensor
detecting the level of ambient light and
may cause the automatic headlight con-
ITO23P105
trol system to malfunction.
Umar: 03214530584
With the headlights on, push
the lever forward to turn on the
high beams.
Pull the lever back to the center
position to turn the high beams
off.
Pull the lever toward you to
turn on the high beams.
Release the lever to turn them off.
You can flash the high beams
with the headlights on or off.
www.prius.pk
2
207