Add/Edit Mac Filter Profile - ZyXEL Communications NWA5301-NJ User Manual

Table 42 Configuration > Object > AP Profile > SSID > MAC Filter List (continued)
LABEL
#
Profile Name
Filter Action

9.5.1 Add/Edit MAC Filter Profile

This screen allows you to create a new MAC filtering profile or edit an existing one. To access this
screen, click the Add button or select a MAC filter profile from the list and click the Edit button.
Note: Each MAC filtering profile can include a maximum of 512 MAC addresses.
Figure 49 SSID > MAC Filter List > Add/Edit MAC Filter Profile
The following table describes the labels in this screen.
Table 43 SSID > MAC Filter List > Add/Edit MAC Filter Profile
LABEL
Profile Name
Filter Action
Add
Edit
Remove
#
MAC
Chapter 9 AP Profile
DESCRIPTION
This field is a sequential value, and it is not associated with a specific user.
This field indicates the name assigned to the MAC filtering profile.
This field indicates this profile's filter action (if any).
DESCRIPTION
Enter up to 31 alphanumeric characters for the profile name. This name is only visible in
the Web Configurator and is only for management purposes. Spaces and underscores are
allowed.
Select allow to permit the wireless client with the MAC addresses in this profile to connect
to the network through the associated SSID; select deny to block the wireless clients with
the specified MAC addresses.
Click this to add a MAC address to the profile's list.
Click this to edit the selected MAC address in the profile's list.
Click this to remove the selected MAC address from the profile's list.
This field is a sequential value, and it is not associated with a specific user.
This field specifies a MAC address associated with this profile.
NWA5301-NJ User's Guide
88