ZyXEL Communications NWA5301-NJ User Manual page 155

802.11 b/g/d in-wall managed access point
Hide thumbs Also See for NWA5301-NJ:
Table of Contents

Advertisement

Figure 89 Maintenance > File Manager > Firmware Package
The following table describes the labels in this screen.
Table 72 Maintenance > File Manager > Firmware Package
LABEL
DESCRIPTION
Boot
This is the version of the boot module that is currently on the NWA.
Module
Current
This is the firmware version and the date created.
Version
Released
This is the date that the version of the firmware was created.
Date
File Path
Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse...
Click Browse... to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Upload
Click Upload to begin the upload process. This process may take up to two minutes.
After you see the Firmware Upload in Process screen, wait two minutes before logging into the
NWA again.
Note: The NWA automatically reboots after a successful upload.
The NWA automatically restarts causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Figure 90 Network Temporarily Disconnected
After five minutes, log in again and check your new firmware version in the Dashboard screen.
Chapter 14 File Manager
NWA5301-NJ User's Guide
155

Advertisement

Table of Contents
loading

Table of Contents