Rehanging.the.door - Asko WM60 Service Manual

Service.manual.WM60
Rehanging the door
Some.machines.in.the.WM60-series.is.supplied.with.a.door.-.is.that.the.case.the.door.is.hung.on.the.left-hand.side...It.is,.however,.
possible.to.re-hang.it.according.to.the.instructions.below..Take.care.not.to.damage.the.paint.when.carrying.out.work.with.tools..
Required tools
Flathead.screwdriver
Torx.size.20
Fixed.spanner.size.8
Instructions
1..Remove.the.plinth.by.carefully.pulling.
it.out.
2..Remove.both.screws.for.the.lower.
hinge..Use.Torx.
3..Push.the.door.upwards.with.care.and.
angle.outwards..If.necessary,.carefully.
press.the.lower.hinge.to.detach.the.door..
4...Slacken.off.the.lower.and.upper.hinge.
pins.using.a.fixed.spanner.
32
Image
.