Sony XAV-W650BT Operating Instructions Manual page 29

Av center
Hide thumbs Also See for XAV-W650BT:
Table of Contents

Advertisement

Available languages

Available languages

 Reduce the volume level differences between
this unit and the BLUETOOTH device (page 13).
The sound skips during audio streaming or the
BLUETOOTH connection fails.
 Reduce the distance between the unit and the
BLUETOOTH device.
 If the BLUETOOTH device is stored in a case which
interrupts the signal, remove the case while
using the device.
 Several BLUETOOTH devices or other devices (e.g.
ham radio devices) which emit radio waves are
used nearby.
 Turn off the other devices.
 Increase the distance between the unit and
other devices.
 Playback sound stops momentarily when this
unit is connecting to a cellular phone. This is not
a malfunction.
You cannot control the connected BLUETOOTH
device during audio streaming.
 Check that the connected BLUETOOTH device
supports AVRCP.
Some functions do not work.
 Check that the connecting device supports the
functions in question.
A call is answered unintentionally.
 The connecting phone is set to start a call
automatically.
 [Auto Answer] of this unit is set to [ON] (page 16).
Pairing failed due to time out.
 Depending on the connecting device, the time
limit for pairing may be short. Try completing the
pairing within the time by setting a single digit
passkey.
The BLUETOOTH function cannot be operated.
 Exit the source by pressing and holding SOURCE
for 1 second, then turn on the unit.
No sound is output from the car speakers during
a handsfree call.
 If the sound is output from the cellular phone, set
the cellular phone to output the sound from the
car speakers.
Siri Eyes Free is not activated.
 Perform the handsfree registration for an iPhone
that supports Siri Eyes Free.
 Set the Siri function on the iPhone to on.
 Cancel the BLUETOOTH connection with the
iPhone and the unit, and reconnect.
SongPal operation
Application name is mismatched with the actual
application in "SongPal."
 Launch the application again from the "SongPal"
application.
Error displays/messages
Hubs not supported.
 USB hubs are not supported on this unit.
No Playable Data
 The disc does not contain playable data (XAV-
W650BT).
 The iPod has no playable data.
 Load music data/files into the iPod.
 The USB device has no playable data.
 Load music data/files into the USB device.
Cannot play this content.
 The currently selected content cannot be played
back.
 Playback content will be skipped to the next
one.
Overcurrent Caution on USB
 The USB device is overloaded.
 Disconnect the USB device, then change the
source by pressing the SOURCE button.
 Indicates that the USB device is out of order, or
an unsupported device is connected.
USB device not supported
 For details on the compatibility of your USB
device, visit the support site on the back cover.
Device no response
 The unit does not recognize the connected USB
device.
 Reconnect the USB device.
 Check that the USB device is supported by the
unit.
 The character cannot be displayed with the unit.
For BLUETOOTH function
Bluetooth Connection Error
 An error has occurred between this unit and the
BLUETOOTH phone.
 Check that the BLUETOOTH signal is set to on
for this unit or the BLUETOOTH phone.
 Try pairing again.
 Reconnect the BLUETOOTH phone.
Bluetooth device is not found.
 The unit cannot detect a connectable
BLUETOOTH device.
29
GB

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xav-v630bt

Table of Contents