Main Screen - Sony SRX-R515P Operating Instructions Manual

l DC IN connector
Connect the DC power cable of the supplied AC
adapter here.

Main Screen

a Auditorium number
If a computer is being used to control multiple
auditoriums via a network, the auditorium numbers
will be displayed. Touch the number to display the
auditorium selection dialog box, and then select the
auditorium to operate.
Caution
Multiple auditoriums can only be controlled via a
network when a browser is used on a computer to
operate this unit. Do not control multiple auditoriums
using the touch panel monitor.
b Date display
Displays the current date (server date).
c Next SPL title for screening
d SPL playback status
Displays the SPL playback status using the same
icons used for the playback control buttons.
For details on the buttons, see "Playing Back CPL"
(page 25).
m CTRL2 connector
Use the supplied connection cable to connect this to
the RS-232C connector on the main projector.
e Current SPL title
f Progress bar
Displays the progress of the title currently being
screened by CPL or SPL frames.
g Elapsed showing time
Displays an approximate time. Although there may be
a slight discrepancy in the units depending on system
conditions, this will not affect the actual screening.
h Scheduled start time of next SPL for screening /
time remaining until start
i Projector status indicator / control button
Indicates the operation status of the projector.
When you tap the button, the "Projector Lamp
Control" dialog box appears allowing you to operate
the projector.
j Job display button
Tap the button to switch to the "Job Status" screen in
the [Library] tab.
13