Ingesting From Hdd Via Cru Dataport - Sony SRX-R515P Operating Instructions Manual

6
After DCP has been ingested, select the following
terminals connected to the HDD, and then tap
[Unmount].
• When connected to INGEST PORT 1 terminal,
select [Ingest_USB_1].
• When connected to INGEST PORT 2 terminal,
select [Ingest_USB_2].
You can now safely remove HDDs.
How to export ingested DCP
1
In the [External Folder] pane, select the export
destination.
2
In the [Local Folder] list, select a DCP to export, and
then tap [Export].
How to confirm progress of ingesting/
exporting DCP
You can tap [Job Status] in the [Library] tab to display the
"Job List" screen and check the progress and status of
ingestion.
The following operations are available for each button in
the [Job List] pane.
[Pause]: Suspends jobs
[Resume]: Reopens jobs
[Cancel]: Cancels jobs in progress.
[Remove]: Deletes jobs
Note
If you pause a job and then remove it, the next job will
enter a paused state. Tap [Resume] to resume that job.
To check ingested DCP
Ingested DCP can be checked in the "Library" screen's
[Local Folder] list.
Select [DCP] to display DCP ingested to the server in the
[Local Folder] list.
The following operations are available for each button in
the [Local Folder] list.
[Edit]: The name of the selected DCP can be changed.
[Details]: Detailed information on the selected DCP will
be displayed.
[Delete]: The selected DCP can be deleted.
Note
To refresh the displayed content, tap
Ingesting from HDD via CRU
DATAPORT
A CRU DATAPORT carrier is necessary to use the CRU
DATAPORT. For further details, contact qualified Sony
service personnel.
1
Insert the HDD containing DCP to the server's CRU
DATAPORT.
2
For further instructions, follow steps 2 to 6 in
"Ingesting from HDD via USB Connector" (page 19)
to ingest DCP.
In step 3 and 6, select [Ingest_SATA] in the [External
Folder] pane.
20
.