AUDIO CONNECTIONS WITH MCA-SERIES CONTROLLERS
The DMS-3.1 can be used with a Russound MCA-Series controller and
supported user interfaces to access all features and provide amplification for
speakers in multiple locations. Use standard RCA audio patch cables (included)
to connect the audio outputs of the DMS-3.1 to the source inputs on the MCA-
Series controller.
Network router
6
For proper operation with MCA-Series controllers, the DMS-3.1 source ID
switches need to be set to correspond to the source inputs used on the MCA-
Series controller. These settings must match the MCA-Series controller system
configuration programmed through Russound's SCS-C5 software.
For more information, please refer to your MCA-Series product manual.
RCA cables
Connections for audio
Russound DMS-3.1 Installation Manual
FM antenna
RCA cables
AM loop antenna
DMS-3.1 Streamer
MCA-88 Controller