Technical Specifications - Russound DMS-3.1 Installation Manual

Status Indicators
Ethernet Green LED Solid –
Ethernet Green LED Off –
Ethernet Orange LED –
Power LED Two Fast Blinks, Pause –
Power LED Fast Blink –
Power LED Slow Blink –
Power LED one Blink per Second –
Power LED Three Fast Blinks, Pause –
Indicates a network link connection
Indicates a problem with the network
connection. Replace the CAT5 network
patch cable.
Indicates active network communication
when blinking.
Critical Firmware Problem. Update to the
firmware or contact Russound technical
support for assistance.
Online or USB update in progress.
Do not disconnect power
AM/FM Tuner module or streaming
module update in progress. Do not
disconnect power
Ready for factory initialization
Factory initialization complete
Russound DMS-3.1 Installation Manual
DMS-3.1 Digital Media Streamer
Frequency Response:
Audio Source Outputs:
Line Audio Output:
Digital Audio Inputs:
Communication ports: 1 Ethernet RJ45, 10/100 Base T
Music File Formats: MP3 (CBR, VBR), WAV (8, 16-bit), OGG Vorbis,
AM/FM Tuner Frequency Range: AM 530 - 1710 kHz
Antenna impedance AM: 300 Ohm balanced
Impedance FM: 75 Ohm unbalanced
Sensitivity: AM: @20 dB S/N 55 dBu
Image rejection: AM: 33 dB
S/N ratio: AM: 45dB
Input Trigger:
Output Trigger:
Power Requirements:
(Autoswitching Power Supply)
Standby Power:
Dimensions:
Weight:

TECHNICAL SPECIFICATIONS

20Hz to 20KHz
(4) Stereo RCA jacks
2 Vrms
(3) USB 2.0/1.1 ports
FLAC (8, 16-bit). AAC, AAC+ (supports up to
24-bit/192 kHz)
FM 87.7 - 107.9 MHz
FM: @30 dB S/N 6 dB max 12 dBu
FM: 80dB
FM: 60 dB
12VDC
12VDC pass-through
100-240VAC 50/60Hz 11W
IEC C13 type connector with 3 terminal
detachable power cord.
< 1.0 W
17" W x 8.5"D x 1.7"H (43 x 21.7 x 4.3cm)
9.0 lbs. (4 kg)
19