2.
Camera Cabling
Please follow the instructions below to complete Network Speed Dome Camera connec-
tion.
2.1
Connect Power
Please refer to the illustrations below to connect power core through the supplied power
adaptor.
2.2
Connect Ethernet Cable
Use of Category 5 Ethernet cable is recommended for network connection; to have best
transmission quality, cable length shall not exceed 100 meters. Connect one end of the
Ethernet cable to the RJ-45 connector of the Network Speed Dome Camera, and the
other end of the cable to the network switch or PC.
NOTE: In some cases, Ethernet Crossover Cable might be needed when connect-
ing the Network Speed Dome Camera directly to the PC.
Check the status of the link indicator and activity indicator LEDs. If the LEDs are unlit,
please check LAN connection.
8
Pin
Definition
1
AC 24_1
2
FG
3
AC 24_2
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.