Overview The Full HD Speed Dome IP Camera transmits digital video and audio data using wire connection. Live video can be monitored and recorded from window-based computer via network. The video encoder supports real-time H.264 Full HD resolution. Simultaneous Quad Codecs, H.264 Baseline / Main / High Profile, MJPEG, are available for various network applications via speeding or limited bandwidth.
Package Contents Please check the box contains the items listed here. If any item is missing or has defects, DO NOT install or operate the product and contact the dealer for assistance. Indoor Dome Camera Package Hard Ceiling Mount M4 Screw (x5) Camera Body Plastic Anchors (x5) Optical Cover...
Page 5
Outdoor Dome Camera Package M3 Standard Screw (x1) M3 Security Screw (x1)* M5 Standard Screw (x1) M5 Security Screw (x1)* Dome Camera with Outdoor Mount Kit CD: Operation Manuals Waterproof Rubber Quick Guide Security Torx* Lubricant Optical Cover *Optional: For Vandal Proof Cover only.
Switch / Connector Definition There are various connectors located on the Dome Camera’s back plate as shown in the figures below. Please refer to the diagrams and tables accompanied with for use of each switch / con- nector. Indoor Outdoor RJ-45 Connector ALARM I/O Power...
Camera Cabling Please follow the instructions below to complete Network Speed Dome Camera connec- tion. Connect Power Please refer to the illustrations below to connect power core through the supplied power adaptor. Definition AC 24_1 AC 24_2 Connect Ethernet Cable Use of Category 5 Ethernet cable is recommended for network connection;...
Apply Alarm I/O The Network Speed Dome Camera supports 4 digital alarm inputs and 2 digital alarm outputs. Please make sure the alarm connections are properly wired before starting to configure alarm related settings on this “Application” page. Please refer to the pin defini- tion table below for alarm system wiring.
System Requirements To perform the Network Speed Dome Camera via web browser, please ensure the PC is in good network connection, and meet system requirement as described below. Items Minimum Requirement 1. Intel Pentium IV, 3 GHz or higher, Intel Core2 Duo, 2 ®...
Access Camera For initial access to the Network Speed Dome Camera, users can search the camera through the installer program: DeviceSearch.exe, which can be found in “Device Search” folder in the supplied CD. Device Search Software Setup Step 1: Double click on the program Device Search.exe. After its window will appear, click on the <Device Search>...
Page 12
Additionally, users can change the Network Speed Dome Camera’s network property, either DHCP or Static IP directly in the device finding list. Refer to the following section for changing the Network Speed Dome Camera’s network property. Example of Changing IP Camera’s Network Property Users can directly change a Network Speed Dome Camera’s network property, ex.
Page 13
Installing DC Viewer Software Online For the initial access to the Network Speed Dome Camera, a client program, DC Viewer, will be automatically installed to the PC when connecting to the Network Speed Dome Camera. If the Web browser doesn’t allow DC Viewer installation, please check the Internet secu- rity settings or ActiveX controls and plug-ins settings (refer to Internet Security Settings)
Page 14
Once login to the Network Speed Dome Camera, users will see the Home page as shown below: Main Tabs Languages Selection Viewer Window Time Display Live Video Panel Video Format Selection Web Recording Button Display Mode Video Compression Info Video Streaming Pause Button Snapshot Button Speaker Button Talk Button...
Setup Video Resolution Users can setup Video Resolution on Video Format page of the user-friendly browser- based configuration interface. Video Format can be found under this path: Streaming> Video Format. The default value of Video Resolution is H.264- 1920 x 1080 (30 fps) + H.264 720 x 480 (30 fps) For more Video Resolution combination detail, please refer to Appendix D: Video Reso-...
Appendix B: Delete the Existing DC Viewer For users who have installed the DC Viewer in the PC previously, please first remove the existing DC Viewer from the PC before accessing to the Network Speed Dome Camera. Deleting the DC Viewer Activate <Control Panel>, and then double click on <Add or Remove Programs>.
Appendix C: Setup Internet Security If ActiveX control installation is blocked, please either set Internet security level to default or change ActiveX controls and plug-ins settings. Internet Security Level: Default Step 1: Start the Internet Explorer (IE). Step 2: Click on the <Tools> tab on the menu bar and select <Internet Options>. Step 3: Click on the <Security>...