Overview The IP Camera features decent low light performance, high resolution up to 5 Mega- pixel, various video resolution combination, multiple video compression formats, etc. It supports true day / night and 3DNR function, which display clear images in low light conditions.
Package Contents Please check the package contains the following items listed below. Camera Package Contents Lightweight Fixed Dome IP Camera Security Torx Power Terminal Block Self Tapping Screws Plastic Screw Anchors Rubber Washers (×6) (×4) (×4) (bundled software and Quick Guide documentation)
Connectors The diagram below shows the IP Dome Camera’s reset button and various connectors. Definition for each connector will be given as follows. Connector Definition Remarks Restore to factory default Reset Button Analog Video Output Alarm I/O GND (Input-) Input+ Alarm connection Output-...
Camera Cabling Please follow the instructions below to complete IP Camera connection. Connect Power Please refer to Section: Connectors. Alternatively, connect the Ethernet cable to the camera’s PoE port and plug the other end of the cable into a PoE switch. NOTE: If using PoE, make sure Power Sourcing Equipment (PSE) is in use in the network.
System Requirements To perform the IP Camera via web browser, please ensure your PC is in good network connection, and meet system requirements as described below. Items System Requirement 1. Intel Pentium M, 2.16 GHz or ® ® Personal Computer Intel Core 2 Duo, 2.0 GHz...
Access Camera For initial access to the IP Camera, users can search the camera through the installer program: DeviceSearch.exe, which can be found in “DeviceSearch” folder in the sup- plied CD. Device Search Software Setup Step 1: Double click on the program Device Search.exe. After its window a p p e a r s , click on the <Device Search>...
Page 10
Additionally, users can change the IP Camera’s network property, either DHCP or Static IP directly in the device finding list. Refer to the following section for changing the IP Camera’s network property. Example of Changing IP Camera’s Network Property Users can directly change an IP Camera’s network property, ex. from static IP to DHCP, in the finding device list.
Page 11
The download procedure of DC Viewer software is specified as follows. Step 1: In the DC Viewer installation window, click on <Next> to start installation. Step 2: The status bar will show the installation progress. After the installation is com- pleted, click on <Finish>...
Page 12
Motorized Model Viewer Window Main Tabs Languages Selection Time Display Live Video Panel Video Format Selection Web Recording Button Display Mode Video Compression Info Video Streaming Pause Button Snapshot Button Speaker Button Talk Button Image and Focus Adjustment The image displays on the Home page when successfully accessing to the IP Camera. Adjust zoom and focus as necessary to produce a clear image.
Setup Video Resolution Users can setup Video Resolution on Video Format page of the user-friendly browser- based configuration interface. Video Format can be found under this path: Streaming> Video Format. The default value of Video Resolution is as below: H.264- 1920 x 1080 (15 fps) + H.264- 1280 x 720 (30 fps) 2M Real time H.264- 1920 x 1080 (30 fps) + H.264 720 x 480 (30 fps) For more Video Resolution combination detail, please refer to...
Configuration Files Export / Import To export / import configuration files, users can access the Maintenance page on the user-friendly browser-based configuration interface. The Maintenance setting can be found under this path: System> Maintenance. Users can export configuration files to a specified location and retrieve data by upload- ing an existing configuration file to the IP Camera.
Page 16
Mechanical Working distance Up to 25m *Built-in IR Wavelength 850 nm Illuminator Number of LEDs LED Indicator Power / Link / ACT Alarm 4 Pin Terminal Block Power 3 Pin Terminal Block Connectors Ethernet RJ-45 Analog Video 1.0 Vp-p / 75 Ω, BNC Audio Line in, Line out General...
Page 17
Camera Image Sensor 1/2.7” Progressive CMOS Effective Pixels 2048(H) x 1536(V) 2592(H) x 1944(V) 0.2 lux (Color) Minimum Illumination 0.02 lux (B/W) White Balance Manual / AWB / ATW Shutter Speed 1~ 1/10000 sec. Lens Lens Vari-focal / Motorized Vari-focal / Motorized Focal Length 3~9 mm 3.6 ~ 9 mm...
Page 18
Mechanical Working distance up to 25 m Built-in IR Wavelength 850 nm Illuminator* Number of LEDs LED Indicator Power / Link / ACT Alarm 4 Pin Terminal Block Power 3 Pin Terminal Block Connectors Ethernet RJ-45 Analog Video 1.0 Vp-p / 75 Ω, BNC Audio Line in, Line out General...
Appendix B: Delete the Existing DC Viewer For users who have installed the DC Viewer in the PC previously, please first remove the existing DC Viewer from the PC before accessing to the IP Camera. Deleting the DC Viewer In the Windows <Start Menu>, activate <Control Panel>, and then double click on <Add or Remove Programs>.
Appendix C: Setup Internet Security If ActiveX control installation is blocked, please either set Internet security level to default or change ActiveX controls and plug-ins settings. Internet Security Level: Default Step 1: Start the Internet Explorer (IE). Step 2: Click on the <Tools> tab on the menu bar and select <Internet Options>. Step 3: Click on the <Security>...
2M Real time / 3M / 5M- Dual Streams H.264-1 + H.264-2 / MJPEG H.264-1 H.264-2 / MJPEG BNC SUPPORT 720 x 480 (12 fps) 2592 x 1944 (12 fps) 640 x 480 (12 fps) 352 x 240 (12 fps) *The resolution is for 5M Model only.
2M Real time / 3M / 5M- Single Stream H.264 Only BNC SUPPORT 2592 x 1944 (12 fps)* 2048 x 1536 (15 fps)** 1920 x 1080 (30 fps) Low Latency*** 1920 x 1080 (30 fps) √ 1280 x 1024 (30 fps) √...