Centrix SI20 User Manual page 12

Additionally, users can change the Network Speed Dome Camera's network property,
either DHCP or Static IP directly in the device finding list. Refer to the following section
for changing the Network Speed Dome Camera's network property.
Example of Changing IP Camera's Network Property
Users can directly change a Network Speed Dome Camera's network property, ex. from
static IP to DHCP, in the finding device list. The way to change the camera's network
property is specified below:
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
12
In the finding device list, click on the Network Speed Dome Camera that is
wished to change its network property. On the selected item, right click and se-
lect <Network Setup>. Meanwhile, record the Network Speed Dome Camera's
MAC address, for future identification.
The <Network Setup> page will come out. Select <DHCP>, and click on <Ap-
ply> button down the page.
Click on <OK> on the Note of setting change. Wait for one minute to re-search
the Network Speed Dome Camera.
Click on the <Device Search> button to re-search all the devices. Then select
the Network Speed Dome Camera with the correct MAC address. Double click
on the IP Camera, and the login window will come out.
Enter User name and Password to access the Network Speed Dome Camera.