Mitsubishi Electric iMode M342i Owner's Manual page 12

Ending a call:
1 Press the On/Off key.
Holding your phone (while making or receiving a call)
How to hold
the phone.
When using the hands free mode, do not put the phone to your ear.
The standby display
When switched on, the mobile searches for connection with the network. Once the
connection has been established, a beep sounds and the network and/or service
provider name or logo are displayed together with the time and date, the signal
strength and the battery charge level. If the mobile cannot find a valid network, the
signal strength and the operator name are not displayed.
The four arrows indicate that features can be accesed via the four arrows on the
cursor key.
The oval symbol in the middle of the cursor key indicates that the Menu can be
accessed by pressing the OK key (in the middle of the cursor key).
Mail and i-mode indicate that you can directly access the mailer and the i-mode service by
pressing the softkeys.
indicates that your mobile is attached to a GPRS network.
Keypad lock
When activated, the keypad lock feature prevents accidental action occurrings (e.g. camera acti-
vation) whilst the phone is being carried in a pocket or a bag for instance. Incoming calls can how-
ever be received and answered. Once the call is over, the keypad lock is automatically reactivated.
To activate the keypad lock from the standby display:
1 Press and hold
To activate the keypad lock from the main menu:
1
Press OK. Select
2 Select Keypad, then select
To deactivate the keypad lock:
1 Unlock
Select
.Keypad locked is displayed.
Settings .
Keypad lock.
and press or press and hold
Avoid
covering the
uper back of the
phone so as to
allow maximum
emission and
reception quality.
Keypad unlocked
.
Getting started
12-
is displayed.