Connections - Stereo - ORPHEUS Two User Manual

C O N N E C T I O N S - S T E R E O
CAUTION : these out-
puts are muted in this
pure stereo configura-
tion
Parallel main stereo
outputs
R : right channel
L : left channel
ORPHEUS TWO
output
R L R L
Input and output for
monitoring or recor-
ding equipment, e.g.
tape deck
R L
input
R L
Input for six stereo sources, e.g. CD
player, tuner, stereo VCR or DA con-
verter
R L
Input for one balanced
stereo source, e.g. CD
player or DA converter
R L R L R L R L
XLR OUTPUT CONNECTOR
Pin 1 : ground
Pin 2 : signal in phase
Pin 3 : signal out of phase
The balanced analogue output is not a floating
output. Do not connect pin 3 of the connector to
ground. If you wish to wire the balanced output to
an unbalanced input (with RCA connector), con-
nect pin 1 to ground and pin 2 to signal, and make
sure pin 3 is not used.
R L
1 2
3
5