Advertisement
Advertisement
Table of Contents
Related Manuals for ORPHEUS THREE S V2
Summary of Contents for ORPHEUS THREE S V2
- Page 1 ORPHEUS THREE S V2 U S E R M A N U A L...
- Page 2 Orpheus Three power amplifier Orpheus Three CD user’s manual The power switch does not disconnect the complete unit from the main line. If any item should be damaged or missing, please inform your supplier without delay.
- Page 3 (approximately 2 seconds) after switching on (approximately 2 seconds) after switching on the unit. the unit. Indicator light is off when the unit is switched Indicator light is off when the unit is switched off. off. ORPHEUS THREE S V2...
- Page 4 2. INPUT The main fuse is located in the fuse recepta- Balanced and unbalanced input connectors. cle. If it has to be changed, replace it by a T10A slow-blow fuse. 3. OUTPUT Dual output connectors in parallel. ORPHEUS THREE S V2...
- Page 5 C O N N E C T I O N S Input for one balanced Dual output, e.g. right or or unbalanced channel, left channel to loud- e.g. right or left channel speaker single or bi- from preamplifier wired ORPHEUS THREE S V2...
- Page 6 0.016% THD+N @ -60dBr : 0.350% Warranty: 1 year parts and labour Dynamic range : 109dB Signal/noise ratio : 109dB Residual noise: 38μV RMS (A-weighted) © Orpheus Laboratories Sàrl - 2002 May 2002 - rev. 1 ORPHEUS THREE S V2...
- Page 7 Switzerland; conceived by ANAGRAM Technologies SA and designed by Chiarini De- sign. IMPORTANT NOTICE Orpheus Laboratories Sàrl reserve the right to make changes to their products or discontinue any product or service without notice. Adequate operating safeguards must be used to minimize hazards.
Need help?
Do you have a question about the THREE S V2 and is the answer not in the manual?
Questions and answers