Manual Operation (Cool, Dry, Fan) - Mitsubishi MSY-A24NA Operating Instructions Manual

MANUAL OPERATION (COOL, DRY, FAN)

I
When the set temperature is to be changed:
TOO
WARM
• Press the button to lower the temperature. One press lowers the temperature by about 1°F.
TOO
COOL
• Press the button to raise the temperature. One press raises the temperature by about 1°F.
In COOL operation
• When the outside temperature is low, the fan of the outdoor unit turns on and off frequently or decreases the rotation
speed to maintain sufficient cooling capacity.
In DRY operation
• The temperature control (temperature setting) cannot be done.
• The room temperature is slightly lowered in this operation mode.
I
The details of the display on the indoor unit are explained on page 6.
If the air conditioner does not cool effectively...
If the fan speed is set to Low or AUTO, sometimes the air conditioner may not cool the air effectively. In this case, change the
fan speed to Med. or upper.
Fan speed: Low or AUTO
To select the COOL, DRY or FAN mode:
ON/OFF
1
Press the button.
2
Select the operation mode by pressing the
Each time this button is pressed, the operation mode is changed in sequence:
(I FEEL) →
To stop operation:
I
ON/OFF
Press the button.
After the operation mode is set once, the operation starts in the same mode as
the one set previously from the next time by simply pressing the
Change the fan speed.
Fan speed: Med. or upper
(COOL) → (DRY) →
MODE
button.
(FAN)
ON/OFF
button.