Hardware Monitoring System
Built-in LM78 hardware monitoring system
•
Monitors power supply voltage and fan speed status
•
IrDA Port
Supports Serial Infrared(SIR) and Amplitude Shift Keyed IR(ASKIR) interface
•
USB Port
Supports two USB ports for future expansion
•
ISAPLUS™
Enhance the ISA bus drive capability
•
E 2
Key
2
1Kbit EEPROM (nonvolatile memory)
•
Accepts read/write data by customer's program
•
Stores system ID, password, and critical data on the board
•
Watchdog Timer
Can be set by 1, 2, 10, 20, 110, or 220 second periods
•
Reset or NMI is generated when CPU does not periodically trigger the timer
•
Your program uses hex 043 and 443 to control the watchdog and generate a system reset
•
Flash Disk - DiskOnChip™
100% compatibility with hard disk
•
Supports M-Systems
•
Built-in True FFS Transparent Flash Block Management and Space Reclamation, which allows
•
the use of the Flash Disk with DOS command with no need for any extra software utility
8 MB to 288 MB
•
ATX Power Supply Function
Connect to the backplanes and/or the ISBC card
•
Mouse and Keyboard Connector
PS/2 mouse port onboard + Ext. keyboard
•
Features
8
Need help?
Do you have a question about the SBC-370 and is the answer not in the manual?