Pci/Plug And Play Setup - Xycom SBC-370 User Manual

PCI/PLUG AND PLAY SETUP

This setup handles the SBC-370 PCI function. All PCI bus slots on the system use
INTA#, thus all installed PCI slots must be set.
Plug and Play Aware O/S >:
OS when the setting is
of interrupt settings, set the setting to
Clear NVRAM >:
PCI Latency Timer (PCI Clocks) >:
the PCI bus.
PCI VGA Palette Snoop >:
device connected to it through different bus (one PCI and one ISA). To enable those
various VGA devices to handle signals from the CPU on each set of palette registers of
every video device, it must be set to
Note:
VGA Palette Snoop
video card when
Allocate IRQ to PCI VGA >:
PCI IDE BusMaster >:
on the PCI.
35
When PNP OS is installed, interrupts will be reassigned by the
. When a non-PNP OS is installed or to prevent reassigning
Yes
Specify whether or not the BIOS will clear NVRAM on every boot.
Define the latency timing (PCI clock) for all PCI devices on
This option is useful only for a system with more than one VGA
If another PCI or ISA video card is needed other than the onboard VGA, set
to . The system will automatically recognize and use the additional
Enabled
.
Enabled
To allocate IRQ to PCI VGA, select
Used to include the BusMastering capability into the IDE Controller
.
No
.
Enabled
BIOS Setup Menus
.
Yes
PCI