Standard Cmos Setup - Xycom SBC-370 User Manual

STANDARD CMOS SETUP

The standard CMOS Setup is used for basic hardware system configuration. The main func-
tion is for Date/Time setting and Floppy/Hard Disk setting. Refer to the following screen.
Use the left arrow, right arrow, and
Date/Time:
next. The numeric keys, 0-9, are used to change the field values. To set the date
(MM:DD:YYYY), select one of the fields (Month, Day, or Year) and then press either
or
PgUp PgDn
for setting the Time (HH/MM/SS). The hour is calculated according to a 24-hour mili-
tary clock, i.e., 00:00:00 through 23:59:59.
Note:
It is not necessary to enter the seconds or type zeros in front of numbers.
IDE hard disk drive setup:
Use the Auto setting for detection during boot-up.
•
Use the Auto-Detect Hard Disk option in the main menu; the computer will
•
automatically detect the HDD specifications.
Manually enter the specifications from the
•
to set it to the current Month, Day, and Year. Follow the same procedure
Use one of the following setup procedures:
BIOS Setup Menus
keys to move from one field to the
Enter
option.
User
29