Initial Provisioning Of F1000 Wifi; Phone; Troubleshooting - UTStarcom F1000 Series Quick Start Manual

Initial Provisioning of F1000 WiFi

4

Phone

If you are using the phone for the first time, once the phone has
connected to the Internet successfully via the Access Point, the
F1000 will need to be provisioned with the latest configuration
and software. This process is automatic and will take several
minutes to complete. During this time, several status messages
such as "downloading" and "decompressing" will be displayed
on the phone's display. Once complete, the phone will power off.
Turn on the F1000 phone. The phone will use the same process
as previously described for connecting to Access Points.
5

Troubleshooting

These are the most common problems and solutions that
come up when starting to use the F1000 WiFi Phone with
Vonage service. If you are having trouble making a phone call,
go through this checklist until your problem is solved:
I cannot make a phone call:
- Is the phone connected to an AP and registered with the
Vonage network?
If so, you will see the standby screen displaying your phone
number and Vonage logo. Key in the phone number to call
and press
Page 09
.