Entering Ssids Directly - UTStarcom F1000 Series Quick Start Manual

3
Connecting to a Wireless Network
Available SSIDs are displayed. Those with no lock next to the name
are open APs; those with a lock are protected APs and you will
need to supply their WEP keys or WPA-PSKs to access them.
2. Press
(Save). Press
press
3. With the Security Mode option highlighted, press
Select from Open AP, WEP Key and WPA-PSK according
to the AP's authentication mode.
4. If WEP Key or WPA-PSK is selected, the phone will directly
access the WEP KEY Info or WPA-PSK Info option. Follow
the prompt to set the option:
- WEP KEY Info: Select 64bit or 128bit to specify the encryption
method that was used to create the WEP; enter the WEP key
and press
and index, select Auth Method and WEP Key Index.
- WPA-PSK Info: Enter the WPA-PSK key and press

3.3.2 Entering SSIDs Directly

1. Press
press
(Ok); press
2. Press
(Ok). With the SSID option highlighted, press
3. Enter the desired AP's SSID and press
4. Follow steps 3-4 specified in Section 3.3.1.
to scroll to the desired SSID and press
to reach the desired AP profile and
(Save) to save the SSID.
(Ok). To set the WEP key authentication method
(Menu); press
(Ok); press to scroll to WiFi Config and press
to scroll to AP Profile and press
to reach the desired AP profile and press
to scroll to WiFi-Settings and
(Ok).
Page 06
(Ok).
(Ok).
(Ok).
(Ok).