Finding And Saving The Access Point; Using Net Search - UTStarcom F1000 Series Quick Start Manual

3
Connecting to a Wireless Network

3.3 Finding and Saving the Access Point

APs can be defined and saved automatically using the Net
Search feature if APs have broadcast turned on. If the desired
AP has broadcast turned off, the AP can be entered directly
through a series of keystrokes on your handset.

3.3.1 Using Net Search

Note: You must be within range of the AP when using Net Search to
define it to the F1000.
1. There are two ways to initiate Net Search:
- Press
scanning for an AP (when the phone is first turned on).
Or,
- Use the menus to initiate Net Search:
Press
press
Page 05
Once connected (and provisioned if this is the first
time you are using your F1000), you will see the
message "Registering via APname". When the
Vonage screen appears displaying your phone
number, you are ready to make and receive calls.
Note: If the WiFi phone cannot connect to an AP, it will
keep searching and wear down your battery. Verify Open
AP availability. If not found, turn off the phone until you are
within range of an Access Point.
(Search) while the F1000 is automatically
(Menu); press
(Ok); press
(Ok).
to scroll to WiFi-Settings and
to scroll to Net Search and press