Oxy Heli OXY 3 Instruction Manual page 32

Finalize servo connection, wiring.
Left Cyclic Servo
Right Cyclic Servo
Front Cyclic Servo
Tail Servo
Electronics Wiring.
Follow our schematics suggestion for the cleanest wiring set up.
Use Cable Ties to hold and secure Servo Wires to the Main frame using our suggestions above, and the Main Frame
built-in sockets. For Extra information about wiring, visit the oxyheli.com web site under Tutorials and Tips.
Page 31
Suggest Servo Wiring Dimension
Servo Wiring Length:
For a clean wiring installation, we suggest trimming the servo wires as shown. It is important to use
the correct tools: Servo Terminals and Crimp Pliers. If you don't have these specific tools, it is best
to leave your servo wires at their standard length and use Cable Ties to lock and secure the wires.
Chapter 17, Servo Installation
115 mm
150 mm
165 mm
Instruction Manual Rev 1