Oxy Heli OXY 3 Instruction Manual page 31

Tail Servo Assembly.
Nose Left
Tail Push Rod Assembly.
Bottom Heli View
Page 30
Nose Right
Arm position with centered
Rudder stick.
Chapter 17, Servo Installation
Reuse STD
Servo Screw
Tail Push Rod Assembly
Top Heli View
OXY0092
4X2X4.2 M2
Linkage Ball
OXY0085
Servo Arm
Hex Nut M2
With Rudder Stick centered
and the Tail Servo Arm in the
center position, adjust the
Tail Push Rod length until the
Tail Bell Crank and Tail Case
Plate are parallel as shown.
The Oxy 3 Tail System has
approximately 3.5 of counter
torque with the Tail Bell Crank
set per instructions.
Parallel arm position with
centered Rudder stick.