Auto Mode; Dmx Mode; Dmx Protocol - Evolite MOVING BEAM 5R User Manual

o Auto Mode
Auto mode is selected in the main menu by pressing on the selection wheel .
The MOVING BEAM 5R provides 2 Auto modes:
1- Sound Auto Mode : Internal programs will be processed with the music detection ( built-in microphone)
2- Auto Mode : internal program will be processed automatically .
o DMX Mode
DMX mode is selected in the main menu (make sure fixture is not in Auto Mode).
You can control the fixtures individually via your DMX-controller
Just select the fixture address, knowing that this address will be the start address. ( 1
The MOVING BEAM 5R provides 2 DMX modes:
1- 8 channels DMX mode
2- 16 channels DMX mode.
These 2 modes are selected in the main menu by the OPTION function.
Note. If 2 MOVING BEAM are addressed with same DMX value, they will move exactly the same way.
o DMX-protocol
Channel
1
2
3
4
5
6
7
8
9
MOVING BEAM 5R Manual Ver. 1.02[Texte]
Value
PAN
0-255 Pan movement
TILT
0-255 Tilt movement
PAN FINE
0-255 Pan fine movement
TILT FINE
0-255 Tilt fine movement
PAN TILT SPEED
0-255 Pan Tilt speed adjustment
FROST
0-255
Frost Effect
STROBE
0 No function
1-50
White
51-240 Strobe with increasing speed
241-255 Open
Shutter
0-255 Shutter open
Color wheel
0-7
White
8-15
Red
16-23 Yellow
24-31 Light blue
32-39 Green
40-47 Light purple
48-55
Pink
56-63 Yellow green
st
DMX channel).
Function
Page 16