Control Panel; Auto Mode; Dmx Mode - Evolite MaxBAR 210 IP65 User Manual

 Set up

Control panel

o
The control board offer several features: you can simple set the starting address, run the pre-
programmed program or make a reset.
The main menu is accessed by pressing the Menu button, Browse through the submenu by pressing
Up or Down. Press the Enter-button in order to select the desired menu. You can change the
selection by pressing Up or Down, confirm every selection by pressing the Enter-button. The
functions provided are described in the following setting.
Item Menu
STATIC
AUTO
DMX
PERS
SETTING
o Auto Mode
Press the MENU until it shows AUTO.
Use the UP/DOWN buttons to set to
o DMX Mode
DMX mode is selected in the main menu.
You can control the projectors individually via your DMX-controller
Just select the fixture address, knowing that this address will be the start address. (1
MaxBAR 210 Manual Ver. 1.00
rd
Sub-menu 3
Restore factory
setting password
UP+DOWN+UP+
DOWN
At1 > At5
, Press ENTER to confirm.
-menu Function
Red
Green
Blue
Strobe
Auto effect 1
Auto effect 2
Auto effect 3
Auto effect 4
Auto effect 5
3CH
9CH
4CH
5CH
6CH
Reset
is
DIM1~8
st
DMX channel).
Description
Static color
setting
Auto effect
choosing
Address
code setting
DMX
channel
mode
setting
Reset and
DIM setting
13
Page