Cisco ASA 5506-X Quick Start Manual page 2

Cisco ASA 5506-X Series Quick Start Guide
ASA 5506H-X
1
3
5
1 ASA 5506H-X chassis
3 Power cord retention lock
5 Power supply
2. ASA 5506W-X Wireless Access Point
The ASA 5506W-X includes a Cisco Aironet 702i wireless access point integrated into the ASA. The access point
connects to the ASA internally over the GigabitEthernet 1/9 interface. All wifi clients belong to the GigabitEthernet
1/9 network. The ASA security policy determines how the wifi network can access any networks on other
interfaces. The access point does not contain any external interfaces or switch ports.
The access point includes either an autonomous image or a Cisco Unified Wireless image (depending on your
order). Autonomous mode lets you manage each access point individually. Unified mode lets you use a separate
Wireless LAN Controller device so you can manage multiple access points centrally.
For details about using the wireless LAN controller, see the
documentation.
For details about the wireless access point hardware and software, see the
documentation.
3. Deploy the ASA 5506-X in Your Network
The following figure shows the recommended network deployment for the ASA 5506-X with the ASA Firepower
module and the built-in wireless access point (ASA 5506W-X):
2
4
2 Blue Console Cable and Serial PC Terminal Adapter
(DB-9 to RJ-45)
4 Power cable
Cisco Wireless LAN Controller Software
2
2. ASA 5506W-X Wireless Access Point
Cisco Aironet 700 Series