Do you have a question about the PS 500 and is the answer not in the manual?
Questions and answers
Владимир
April 2, 2025
не работает счётчик
1 comments:
Mr. Anderson
April 2, 2025
The counter on the AbCoaster PS 500 is not working because it is delicate and got damaged when sweat fell on it.
This answer is automatically generated
Timothy
March 22, 2025
I cannot put the seat assembly on the rollers. Everything else is assembled. The "quick and easy assembly instructions" did NOT say do NOT cut the strap. Instruct me on how I can put the seat on the rollers. There are two rubber stops that prevent me from putting the seat on the rollers.
1 comments:
Mr. Anderson
May 14, 2025
To attach the seat assembly to the rollers on the AbCoaster PS 500, first remove the rubber stops that are preventing the connection. These rubber stops are likely in place for shipping or safety reasons. Once removed, align the seat assembly with the rollers and slide it into position on the track. Make sure the seat moves freely along the track after installation.
Page 2
Manufacturer’s Limited Warranty – AB COASTER PS500 ® The manufacturer warrants that your Ab Coaster® is free of defects in materials and workmanship and will, at its option, repair or replace any defective Ab Coaster® that is returned to it. Except as described in the following sentence, all parts and components of the Ab Coaster are warranted for one (1) year from the original date of purchase.
PARTS LIST AND VIEW CONTENTS 4 Important Safety Information 5 Assembly Instructions 7 Getting On and Off the Ab Coaster® PS500 7 Exercise Instructions 8 Free-Style Motion Seat 9 Resistance Training 9 Digital Counter 9 Moving, Storing & Maintaining the Ab Coaster® PS500 10 Parts List and View 11 Warranty Information CAUTION: PINCH P...
THE HANDLES. Please visit www.AbCoaster.com to view video of proper usage of the machine. • Do not pick up the Ab Coaster® PS500 to move it. Follow the instructions in this booklet for moving the Ab Coaster® PS500.
EXERCISE INSTRUCTIONS ASSEMBLY INSTRUCTIONS Your Ab Coaster® PS500 has been thoroughly inspected and partly assembled before shipment. You will need to take a few additional steps as described below to complete assembly. FRONT POST ARMREST CONSOLE Step 1: Attach Rear Foot SEAT FRONT Step 2: Attach Front Foot...
Page 6
GETTING ON AND OFF THE Ab Coaster PS500 Step 3: Attach front post to curved ® track. The front post is attached to track in 2 locations as shown using the 2 pre-attached Allen head screws for each location. Finger tighten only. Step 4: Attach armrest console to top of front post using the 4 pre-attached Allen head screws.
Need help?
Do you have a question about the PS 500 and is the answer not in the manual?
Questions and answers
не работает счётчик
The counter on the AbCoaster PS 500 is not working because it is delicate and got damaged when sweat fell on it.
This answer is automatically generated
I cannot put the seat assembly on the rollers. Everything else is assembled. The "quick and easy assembly instructions" did NOT say do NOT cut the strap. Instruct me on how I can put the seat on the rollers. There are two rubber stops that prevent me from putting the seat on the rollers.
To attach the seat assembly to the rollers on the AbCoaster PS 500, first remove the rubber stops that are preventing the connection. These rubber stops are likely in place for shipping or safety reasons. Once removed, align the seat assembly with the rollers and slide it into position on the track. Make sure the seat moves freely along the track after installation.
This answer is automatically generated