4)Remove the screws of
the front panel, including
the fixing screws of motor
holder and then remove
the front panel.
5)Remove the screws of
the right side plate and
remove the right side
plate.
2
Fan ass'y
How to remove the fan
ass'y.
1)After remove the panel
plate following procedure
1, remove the hex nut
fixing the fan and then
remove the fan.
Screw of
top panel
Screws of left plate
Screws of the motor holder
Fan
64
Screws of front panel
Electronic control box
Reactor
Compressor and
liquid-gas separator
Nut fixing the fan