Safety Instructions; Connectors; Line Output; Phono Input - Pro-Ject Audio Systems MaiA Instructions For Use Manual

Dear music lover,
thank you for purchasing a Pro-Ject Audio Systems´ integrated amplifier.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse.
!
Important notice.

Safety instructions

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to connect/disconnect the unit from the mains. Make sure that the power
supply is easily accessible at all times. Never handle the device, the power supply while your hands are
wet or damp. Avoid letting liquids enter the device or the power supply. Never place any item
!
containing liquid, such as a flower vase on or near the device. Never spill any liquid on the device or
the power supply. Never place any naked flame sources, such as lighted candles on or near the device.
The product shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any
other similar conditions.

Connectors

Make all connections except the connection to the headphone whilst the amplifier is disconnected
from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red, the
!
left channel black or white.
Never use any other power supply than the one supplied with the unit.

Line output

A power amplifier or active loudspeakers can be connected to the output socket marked Output.

Phono input

Connect the tonearm signal lead to the In 1 Phono of the amplifier. The earthing wire may be connected to
the screw terminal if you encounter hum problems when using the turntable.

Line inputs

Line level sources such as CD player, radio or TV can be connected to the input sockets marked In 2, In 3 or
In 4.

Digital inputs

Sources with a digital output such as TV satellite/cable receiver or a game console can be connected to the
digital inputs. Coaxial to In 5 and optical to In 6 and In 7.
2
© Project Audio Systems · Pro-Ject MaiA · Revision 2014.7.8