Table/Desk Installation - AT&T 959 User Manual

Table/Desk Installation

1 Reposition the base wedge for table/desk use.
Press on the base wedge as shown in figure a to remove the
wedge. Turn the wedge so that the larger end is toward the
top of the telephone. Reattach the wedge by positioning it
as shown in figure c and sliding it in the direction of the arrows
until it locks in place.
figure a
2 Connect the long telephone line cord to the jack labeled
TEL on the back of the phone.
3 Connect the line cord to a modular wall jack.
figure b
figure c
Modular
telephone
wall jack
Telephone Telephone
line cord line cord
continued on page 6
5