INSTALLATION INSTRUCTIONS
Before Using Your Appliance
Remove the exterior and interior packing.
•
Before connecting the appliance to the power source, let it stand upright for
•
approximately 4 hours. This will reduce the possibility of a malfunction in the cooling
system from improper handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
•
Free-Standing Installation
This appliance is designed to be installed built-in or free standing.
•
Locate the appliance away from direct sunlight and sources of heat (stove, heater,
•
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may
increase electrical consumption. Ambient temperature below 68°F (20°C) or above
90°F (32°C) will hinder the performance of this appliance. This unit is not designed
for use in a garage or any other outside installation.
Avoid locating the appliance in moist areas.
•
Plug the appliance into a dedicated, properly installed-grounded wall outlet. Do not
•
under any circumstances cut or remove the third (ground) prong from the power cord.
Any questions concerning power and/or grounding should be directed toward a
certified electrician or an authorized service center. This unit is not designed to be
installed in an RV or used with an inverter.
After plugging the appliance into a wall outlet, allow the unit to cool down for 3 ~ 4
•
hours before placing wine bottles or beverage cans in the appliance.
Product Description
Model No.
Unit Dimensions
( inches )/mm
Net Weight ( lbs)/kg
Stainless Steel Built-In Wine Cellar
Width
23.4"/595mm
33.7"/856mm
99 lbs /45kg
274 02 40
Height
24.5"/624mm
Depth
8