Operating Your Appliance - N'Finity 274 02 40 Instruction Manual

OPERATING YOUR APPLIANCE

ON/OFF POWER
To turn ON or OFF the appliance, press the
seconds.
SETTING
You can control the internal temperature of each side/zone independently by using the
control panel for that side.
You can press the left side
temperature of each respective side / zone.
The degrees indicators will appear in the display window.
The set temperature will increase 1ºF or 1ºC if you push the
•
decrease 1ºF or 1ºC if you push the
NOTE:
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes
•
before restarting the unit. If you attempt to restart before this time delay, the wine
cellar will not start.
When you use the wine cellar for the first time or restart the wine chiller after having
•
been shut off for a long time, there could be a few degrees variance between the
temperature you select and the one indicated on the LED readout. This is normal
and it is due to the length of the activation time. Once the wine cellar is running for
a few hours everything will be back to normal.
STORAGE
Many bottles may differ in size and dimensions. As such the actual number of bottles you
may be able to store may vary.
ON/OFF
UP DOWN
and buttons/marks to control the internal
DOWN
button/mark and hold for 3
UP
button once, or will
button once.
10