Related Manuals for N'Finity 274 02 40
Summary of Contents for N'Finity 274 02 40
- Page 1 INSTRUCTION MANUAL 42 BOTTLE BUILT-IN AND FREESTANDING WINE CELLAR MODEL：274 02 40 BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
-
Page 2: Table Of Contents
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS COMPONENTS AND PARTS IMPORTANT SAFETY PRECAUTIONS INSTALLATION INSTRUCTIONS OPERATING YOUR APPLIANCE 10-11 CARE AND MAINTENANCE TROUBLESHOOTING GUIDE WARRANTY INFORMATION... -
Page 3: Appliance Safety
APPLIANCE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. -
Page 4: Important Safeguards
IMPORTANT SAFEGUARDS Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following: Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an •... -
Page 5: Components And Parts
COMPONENTS AND PARTS 1) Temperature Control Panel (Not shown) 2) Circulation Fan 3) Interior Light 4) Cabinet 5) Wine Bottle shelf 6) Wine Bottle Storage 7) Beverage Shelf... -
Page 6: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, WARNING or injury when using your appliance, follow these basic precautions: Read all instructions before using the wine or beverage cooler. • DANGER or WARNING: Risk of child entrapment. •... - Page 7 The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheating.
-
Page 8: Installation Instructions
After plugging the appliance into a wall outlet, allow the unit to cool down for 3 ~ 4 • hours before placing wine bottles or beverage cans in the appliance. Product Description Stainless Steel Built-In Wine Cellar Model No. 274 02 40 Width Height Depth Unit Dimensions ( inches )/mm 23.4”/595mm... - Page 9 Built-In Installation The cutout dimension illustrated in figure (A) allows for door swing and access to the pull-out shelves when installed as a built-in appliance. If installing between frameless cabinets, a ½” wide filler strip or side panel may be needed on hinge side. The filler strip will act as a spacer between the appliance case and adjacent cabinet door swing.
-
Page 10: Operating Your Appliance
OPERATING YOUR APPLIANCE ON/OFF POWER ON/OFF To turn ON or OFF the appliance, press the button/mark and hold for 3 seconds. SETTING You can control the internal temperature of each side/zone independently by using the control panel for that side. DOWN You can press the left side buttons/marks to control the internal... - Page 11 INTERIOR LIGHT Interior lights are available in both zones. • You can turn the interior light on or off in each zone by pushing the button marked • Light. with the “bulb” symbol CONTROL PANEL LOCK Your wine cellar is equipped with an automatic control panel lock function. This •...
-
Page 12: Care And Maintenance
CARE AND MAINTENANCE Automatic Defrost Any ice build-up on the inner back wall during operation will automatically defrost • during a compressor off cycle. When defrosting is in process, the circulation fans for both zones will continue to run. • Water from the defrost operation will drain into the drip tray (on the compressor) •... -
Page 13: Troubleshooting Guide
TROUBLESHOOTING GUIDE You can solve many common appliance problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling for service. PROBLEM POSSIBLE CAUSE Wine cellar does not operate. Not plugged in. -
Page 14: Warranty Information
Warranty Information Please speak to your retailer before calling Wine Enthusiast if you did not purchase your wine cellar directly from Wine Enthusiast. Limited warranty – 90 day replacement plan with a free 9 month upgrade, totaling 1 year, on parts and labor from the date of shipment. For customer service, please contact Wine Enthusiast by e-mail (custserv@WineEnthusiast.net) or by phone (800.648.6058).