Important Safeguards - N'Finity 274 02 40 Instruction Manual

IMPORTANT SAFEGUARDS

Before the appliance is used, it must be properly positioned and installed as described in
this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or
injury when using the appliance, follow basic precaution, including the following:
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an
•
adapter, and do not use an extension cord.
Replace all panels before operating.
•
It is recommended that a separate circuit, serving only your appliance be provided.
•
Use outlets that cannot be turned off by a switch or pull chain.
Never clean appliance parts with flammable fluids. These fumes can create a fire
•
hazard or explosion. And do not store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance. Before proceeding with cleaning
and maintenance operations, make sure the power line of the unit is disconnected.
Do not connect or disconnect the electric plug when your hands are wet.
•
Unplug the appliance or disconnect power before cleaning or servicing. Failure to do
•
so can result in electrical shock or death.
Do not attempt to repair or replace any part of your appliance unless it is specifically
•
recommended in this material. All other servicing should be referred to a qualified
technician.
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR
Use two or more people to move and install appliance. Failure to do so can result in
•
back or other injury.
To ensure proper ventilation for your appliance, the front of the unit must be
•
completely unobstructed. Choose a well-ventilated area with temperatures above
60°F (16°C) and below 90°F (32°C). This unit must be installed in an area protected
from the elements, such as wind, rain, water spray or drips.
The appliance should not be located next to ovens, grills or other sources of high heat.
•
The appliance must be installed with all electrical, water and drain connections in
•
accordance with state and local codes. A standard electrical supply (115 V AC only, 60
Hz), properly grounded in accordance with the National Electrical Code and local
codes and ordinances is required.
Do not kink or pinch the power supply cord of appliance.
•
The fuse (or circuit breaker) size should be 15 amperes.
•
It is important for the appliance to be leveled in order to work properly. You may
•
need to make several adjustments to level it.
Never allow children to operate, play with or crawl inside the appliance.
•
Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners
•
may damage or discolor the interior.
Do not use this apparatus for other than its intended purpose.
•
Replace all panels before operating.
•
MODEL
4