Machine Data Editor - Maggi EVOLUTION 1000 User And Maintenance Manual

.1.2.1 Machine Data Editor Menu.
5

( Machine Data Editor )

- To access the tool must always enter the password, selecting the command (Machine Data Editor ) .
- In the central window by selecting " User" , type the same word "User " as password (User).
- Selecting " Constructor " , is used to change the parameters of the machine and can be used only by those
who enabled this feature . This password is to ask the manufacturer of the machine, if required to do software
updates and machine parameters.
————————————————————————————————————————-
INFORMATION
( OK )
- Confirm the password with "OK".
- In the " TOOL " enter the data of the tool . The position , the diameter , length, etc. ..
- This procedure is to be repeated for all the tools to be entered in the configuration tool . Attention to the posi-
tions where it is not allowed to insert a tool of Ø35 . Paragr . 3.1.
————————————————————————————————————————————
( User )
———
———
———
———
———
———
———
———
Page 36
( TOOL )
———
———
———
———
———
———
———
———