Assembling - Maggi EVOLUTION 1000 User And Maintenance Manual

4.5 Assembling

INFORMATION
Keep all the facilities used for the placing and carrying of the machine in order to have them available
for future positioning. The machine is already assembled; only electrical and pneumatic connections
are needed to start working.
4.6 Electrical connection
CAUTION
The electrical connection of the machine to the power point has to be done only by using the supplied
plug (type 3P+T16A).
INFORMATION
PLUG TYPE 3 P + T 16A
4.6.1 Electrical system feature
Before switching on the machine make sure that the voltage is the right
CAUTION
Do not switch on the machine before having checked the compliance with following electrical require-
ments : possible damages caused by a wrong electrical connection or voltage are not covered by war-
ranty.
The electric system quality has to respect the CEI norms 60204-1, IEC 204-1 (unless otherwise agreed with
the customer):
Voltage (see picture) with tolerance + 10%.
−
Voltage's frequency with tolerance + 2%.
−
Maximum power required (see picture).
−
Harmonic distortion: from the2nd to the 5th < 10%, from the 6th to the 30th <2%.
−
Lack of balance in 3 phase power supply: <2%.
−
one by checking electrical data stated
on the machine plate.
Page 32