Commands Main Menu - Maggi EVOLUTION 1000 User And Maintenance Manual

5.1.2 Commands main menu

INFORMATION
The system is visible on a monitor 15 "TFT ILENIA software and related management icons .
When you start the system automatically starts the program management JOB LIST.
After loading the machine needs to reset the axes "ZERO SETTING".
( JOB LIST )
( ZERO SETTING )
————————————————————————————————————————————————
Alternatively, or in other screen being set to zero the axes can also be obtained with the commands listed be-
low . Axis START then , finally executed command the LEDs "zero setting", all become green and the car is
ready to work.
( LED )
( Axis )
————————————————————————————————————————————————-
The first thing to do is to configure the tool magazine and then the installation of the tools. Select " Manual"
from the menu bar . Open the other drop down menu and select " Machine Data Editor" to enter into man-
agement tools
( Manual )
( Machine Data Editor )
Page 35