Lifting And Transport - Maggi EVOLUTION 1000 User And Maintenance Manual

4.2 Working area
Keep aisles for the operators and make sure that they are appropriate so as to assure a safe use and mainte-
nance. Before placing the machine make sure of keeping a free area available all around the machine itself,
which has to be not smaller than 1500mm in all directions. Choosing the most appropriate place to set up Your
working area is very important in order to create high-quality work conditions in terms of safety, maintenance of
the machine etc. Make sure that Your working area is well lit and airy. Make sure that the normal working activi-
ties and the environmental conditions of the workplace are not obstacles for the free access to the machine
drives, especially to safety devices. The carrying-out of all operation and maintenance activities has to be en-
sured in any case.

4.3 Lifting and transport

4.3.1 General information
Carriage and installation have to be done by well-trained and qualified working-staff and according to the indica-
tions stated in this chapter. The machine is wrapped in a plastic film, giving protection during the transit, and in
consideration of the final destination and kind of transport it can be packed either into a wooden box or just fixed
on a pallet.
CAUTION
Possible "DANGER ZONES" between the place of unloading and the predisposed installation area have
to be previously detected and defined.
CAUTION
Electrical cables and/or pipes conveying high-temperature liquids and high-pressure gases lying be-
tween the place of unloading and the predisposed installation area of the machine HAVE TO BE de-
tected and insulated in compliance with local regulations and laws, moreover any possible electrical
retention HAS TO BE previously detected and removed
4.3.2 Personnel's qualification
The unloading of the machine has to be done by a qualified working-staff well-trained in the usage of fork-lift
trucks.
CAUTION
The over-mentioned operations have to be carried out with the greatest care, by means of the suitable
unloading facilities and inside the predisposed areas.
Make sure that no people is exposed when carrying out the lifting and unloading operations, and prevent any-
body from walking under or close to the machine while being carried to the designated area.
4.3.3 Lifting instruction
DANGER
While carrying the machine to the designated area always keep it at a minimum height from the ground
so as to ensure the greatest loading stability and the optimal viewing conditions for the driver in order
to prevent any possible collision.
Page 29