Max/ Min Memory - Mebus 10394 Owner's Manual

LANGUAGE
GE = German
En = English
FR = French
IT = Italian
SP = Spanish
TIME SYCHRONIZATION
The unit will start synchronizing the clock after the 1st channel of the RF thermometer is
registered. At normal mode, hold "-/ " button 3 seconds for force synchronization. The
antenna icon will appear during synchronization, if the icon disappear afterwards, time signal
is not available at the moment. Try other locations later. Place the unit away from source of
interference such as mobile phones, appliances, TV etc.
Antenna icon will appear fix on screen if the synchronization is successful. The clock will have
a daily synchronization at 01:00 everyday. Maximum 4 more attempts at one hour interval.
ALARM SETTING
Hold "CLEAR/ " for 3 seconds. Press "+, - " to select AL 1 or AL 2 and press "CLEAR/ "
to confirm. Press "+, - " to enter the desired Hr/ Min values and press "CLEAR/ " to confirm
setting.
To view alarm time 1 and 2, repeat press "CLEAR/ " button at normal mode.
Alarm time 1 or 2 will display for 10 seconds and resume to normal clock thereafter.
To turn Alarm 1, 2 on and off, repeat press " +/ " button at normal mode.
The unit will provide Daily Alarm which last for 1 minutes. At snooze mode, the alarm will
repeat 10 minutes.
SNOOZE & BACKLIGHT
Plug in the 4.5V adapter into the adapter socket at the back for continuous backlight.
Press SNOOZE/LIGHT to turn on backlight temporarily if adapter is not connected.
When alarm is sounding, press SNOOZE/LIGHT to trigger snooze alarm. To stop alarm for
one day, press any key on the unit.

MAX/ MIN MEMORY

Press the "MEM" to view the maximum values for 5 seconds, press again to view the
minimum memory. To clear the memory record, press "CLEAR/ " while the respective
values displaying on screen.
Temperature Trend Indicator: The 3 icons will indicate Rising, Steady, Falling if the
temperature change is more than 1 degree in an hour.
17
W182 SNPMEB.indd 17 3/15/07 4:22:59 PM