Getting Started; Setup And Connections (Connecting Other Equipment); Section 1 - ICON Inspire 5air Owner's Manual

SECTION 1

Getting Started

Connecting your InSpire-air series keyboard system
Connect the Inspire-air series keyboard to your computer via the USB ports.
1
Choose a USB port on your Mac/PC and insert
the wide (flat) end of the USB cable. Connect
the cable's square end to the Inspire-air. Turn
on your Inspire-air and your Mac/PC's
operating system should automatically "see"
the new hardware and notify you that it is
ready to use.
(Note: If you are connected to a computer with powered
USB capacity, you will not need to use the external
power supply. If you are not using a USB connection, the
power supply will be required.)
Connect your Inspire-air to an external synthesizer or sound module.
2
Use the MIDI OUT connector on your Inspire-air to
connect to an input port on your external device.
(Note: A USB device and a traditional MIDI device can both be
used at the same time with this configuration. MIDI via USB is
always enabled.)
Connect external hardware such as a drum machine or another keyboard.
3
Connect the MIDI OUT on the equipment you
wish to control to the MIDI IN port on your
Inspire-air.
(Note: The power cord is required when operating via the
MIDI ports only.)
Mac & PC
a
b
Tab
CapsLook
Shift
Ctrl Alt
intel
AltGr Ctrl
9