Getting Started Connecting Your Ikeyboard Nano Controller - ICON iKeyboard 3Nano User Manual

Getting Started
Connecting your ikeyboard Nano controller
1. Connect the ikeyboard Nano to your Mac/PC via the USB port.

Choose a USB port on your Mac/PC and insert the wide (flat) end of the USB cable. Connect

the cable's small jack end to the ikeyboard Nano. Your Mac/PC should automatically "see"
the new hardware and notify you that it is ready to use.
2. Setup your DAW

Activate the ICON ikeyboard Nano controller in your DAW or MIDI software using "MIDI
Setup" or "MIDI Devices".
8