Service Information; Section 8 Service Information - ICON Inspire 5air Owner's Manual

Section 8
Technical and Service Information
Technical
Caution: Electro Static Discharge, Electrical Fast Transient and Conducted RF
interference may cause the unit malfunctioning. In such cases, unplug the unit
and plug it in again to restore normal operation.
Note: Your InSpire-air product has been tested to comply with FCC Standards
FOR HOME OR OFFICE USE. Modifications not authorized by the manufacturer
may void users authority to operate this device.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.
Service
If your InSpire-air needs servicing, follow these instructions.
1. Ensure the problem is not related to operation error or external system
devices.
2. Keep this owner's manual. We don't need it to repair the unit.
3. Pack the unit in its original packaging including end card and box. This is
very important. If you have lost the packaging, please make sure you
have packed the unit properly. ICON is not responsible for any damage
that occurs due to non-factory packing.
4. Ship to the ICON tech support center or the local return authorization.
U.S. OFFICE:
ICON Digital Corp.
2222 Pleasant View Road Suite #1 Middleton, WI 53562 USA
ASIA OFFICE:
ICON (Asia) Corp.
Unit 807-810, 8/F., Sunley Centre,
No. 9 Wing Yin Street, Kwai Chung, NT., Hong Kong.
5. For additional update information please visit our website at:
www.icon-global.com
45