Controlling Multiple Devices - ICON Inspire 5air Owner's Manual

Controlling Multiple Devices

Inspire-air can control a softsynth, a hardware module, a loop-based
audio program AND a digital audio recorder, all at the same time. Each
set of control assignments can be stored in an F-slot memory location,
including layers of fader, knob, and pad assignments. Global channel
assignments are the only thing that must be edited manually, and are not
stored in an F-slot. When controlling multiple MIDI receivers, you can
switch between F-slot presets freely. You only have to change the global
channel setting to keep messages from being sent to all devices all the
time.
Example
Module
F-slot 1, global channel 1. Set module to receive on Channel 1 only.
Disable OMNI mode on all devices.
SoftSynth
F-slot 2. Manually change InSpire-air's Global Channel to 2.
Loop Program
F-slot 3, Global Channel 3
Recording Software
F slots 3,4,5, for all 28 channels of available control. Global channel 4.
41