Setting The Minimum And Maximum Values - ICON Inspire 5air Owner's Manual

Table of Contents

Advertisement

Setting the Minimum and Maximum values

You may want to set a controller with an assigned MIDI CC to have a minimum
and/or maximum value of something other than "0" or "127," respectively. For
instance, if you wish to have the volume fader to fade to a certain level other
than silent, program that fader (usually F9) for that minimum value. As you
bring the fader to its lowest point, the control will reach the pre-programmed
volume level will be met. When the control is all the way down, instead of being
off, it will be at the set minimum level.
Similarly, if you want a peak volume to be assigned without exceeding that limit,
set its maximum using MAX.
Assigning a Min/Max value
To set a minimum value, or a "floor," press the MIN
(Advanced + Min) button. It lights up. Activate the
fader, knob, or pad that you wish to set by sliding,
turning, or tapping it. The ID number for that control
will appear on the left side of the LCD screen. The
value at the right of the LCD screen is the current
minimum value for that control. It has a range from 0
to 127, like most other MIDI values. Choose a value
using the jogwheel, or use the numbered buttons.
Activate another controller to set another minimum
value, or press the MIN button again to turn off the
assign function. The button will go dark.
The process for setting the Maximum value is just
the same as setting the "floor". Activate the
control whose max or "ceiling" you want to set up.
Press the MAX (Advanced + Max) button. It will
light up. Select the maximum value using the
jogwheel or numbered buttons. Then, press MAX
again to turn off its function.
Michael Says:
"Keep a written record of which controls are getting
their floors and ceilings re-assigned, AND what the new
values ARE. It'll keep the surprises out of your mixes!"
STORE
RECALL
TRANS
OCT
CC
ZONE
CHAN
BANK LSB
MSB
MIN
DEV. ID
NRPN
PANIC
SNAPSHOT
GLOB
LAY
F P V
CHAN
123456
STORE
RECALL
TRANS
OCT
CC
ZONE
CHAN
BANK LSB
MSB
MIN
DEV. ID
NRPN
PANIC
SNAPSHOT
GLOB
LAY
F P V
123456
CHAN
GLOB
MAX
GLOB
MAX
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inspire 6airInspire 8airinspire 8psair

Table of Contents