Uniden DECT Elite 9005 Owner's Manual page 7

To register to an additional DECT Elite 9035 Series base:
1) Disconnect the base AC adapter.
2) Then press and hold [fi nd hs] or [fi nd] while you reconnect
the adapter.
Keep pressing [fi nd hs] or [fi nd] until the charge LED starts
to blink.
3) On the handset, press [Select/menu]. Select the REGISTER
BASE menu. HANDSET REGISTERING will appear in the
display. (After step 2, you have thirty seconds to complete
this step 3 before the system returns to standby.)
4) Wait approximately thirty seconds. "REGISTRATION
COMPLETE" will be displayed to indicate the handset has
fi nished registering.
What if the display shows REGISTRATION FAILED? What if the display shows REGISTRATION FAILED?
Repeat the process starting with step 1. Repeat the process starting with step 1.
6